P600 Audi MMI 2G additional information

Firmware Requirements:

MMI 2G Basic (Low)

If firmware version for Audi A6 or Q7 is lower than 0410, the MMI firmware must be updated.

Audi A4 (8K) and A5 have the minimum necessary version ex works.

MMI 2G High

If firmware version for Audi A6, Q7 and A8 is lower than 3450, the MMI firmware must be updated.
Audi A4 (8K) and A5 have the minimum necessary version ex works.

Phonebook Sync

Phonebook synchronization is only available on MMI 2G High!

 

Controls

This device supports basic control functions such as (PLAY, PAUSE, NEXT, PREV, FF, REW) via MMI buttons.

In addition, when playing music via Bluetooth, the title / artist name / album is shown on the display of your MMI system.

 

Installation Connection

This interface is connected on the back of the CD changer (or replaces the CD changer in MMI 2G Basic systems) on the fiber optic connector.

If there is no CD changer, this box is connected directly to the MMI system. CD changer option does not need to be activated, as it is always active from the factory.

The power supply can be connected to the back of the CD changer using the supplied Plug & Play cable.

If no CD changer is present, the +12V constant and ground cables from the interface must be connected to the corresponding wires of your car wiring. The necessary cable is also included.